Written by trustone3

What Is A 3-Phase Electrical Service?

What Is A 3-Phase Electrical Service?

All of us are facing the brunt of the increasing cost of electricity, especially if we are using large motors. It is advisable for residents to ask an electrical contractor to install a 3-Phase wiring system, particularly, if you are using large motors or larger loads. The reason being is because this type of system is considered to be more economical since it uses less conductor material to transmit electric power as compared to the single-phase or two-phase systems of the same voltage.

Apart from the economical issue, you may even have some problem delivering the current required to start the motor with the help of a single-phase line in case the motor size is more than 5 horsepower (hp). The motor may require approximately six times more current to start. If a large motor start-up is done on a single-phase line, there are chances of lights blinking and related problems occurring. To avoid all these complications, it is better to install a more advanced system with the help of an electrical contractor.

A 3-Phase wiring system is a type of polyphase system that is used by electric power distribution grids to distribute power. You can easily get this type of electrical system installed by experienced electrical contractors. In a polyphase system, there are three circuit conductors carrying three alternating currents that reach their peak values at different times. In the three-phase electrical system, one of the three phases is nearing a peak at any given moment. The three phase electrical power requires four wires- one for each phase conductor and the fourth for the neutral. A three-phase electrical system is a very efficient and more reliable form of electrical power distribution. The conductors that are used in a three-phase power system are color-coded.

Usually, a three phase electrical service is used to power large motors and other large loads. With the help of a rotary phase, a single-phase electrical service can be converted into a three phase electrical system, but then there are chances of significant loss of efficiency and probability of damage or increased wear and tear to the equipment involved.

There are several benefits of using a poly-phase electrical service. The voltage fails to flick in a three phase electrical system and can’t produce a less vibrational effect on the motor. Therefore, it offers a smooth and efficient service. It is also observed that the equipment which works on the three phase power lasts longer as compared to those that run on a single phase power.

Therefore, the large commercial consumers should use a poly-phase service because of their huge energy requirements. You must ask electricians to install the three phase electrical system for industry use.

Save money on your electric bills by installing a three phase electrical system.

 

Leave a Reply

Your email address will not be published. Required fields are marked *